Digitrax BXP88 사용 설명서

{카테고리_이름} Digitrax BXP88에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitrax BXP88 16 페이지.

페이지 인쇄

BXP88

LocoNet DCC Occupancy Detector with Transponding

and Power Management for 8 Detection Sections,

Transponding Zones, and Power Sub-Districts

Features:

▪

DCC Occupancy Detection supports up to 8 Detection Sections letting you

know when equipped rolling stock is in a detection section on your layout.

▪

One Transponding Zone per Detection Section lets you know the location of

transponder-equipped locos or rolling stock.

▪

Intelligent Automatic short-circuit and over-current power management

for each Detection Section, improves reliability by avoiding most booster

shutdowns.

▪

Connects to LocoNet to transmit Detection Section occupancy, Transponding

and track power information.

▪

Detects any powered locomotives in a Detection Section.

▪

Detects rolling stock equipped with resistor wheel sets.

▪

Identify where specific rolling stock is on your layout with Digitrax transpon-

der-equipped locos and rolling stock.

▪

Plug and Play with Digitrax DCC systems with automatic Railsync polarity

detection.

▪

LED output headers for front panel indication of Detection Section occupancy,

Transponding, and power status.

▪

Easy-connect pluggable track wire terminal blocks can plug-in straight or at

right angles.

▪

3 Amp capacity per Detection Section , 8 Amp total unit capacity.

▪

Automatically updates status at track power on.

▪

Operations Mode Read Back allows you to read CV values of decoders

equipped with transponders when on track.

▪

Firmware update capability via IPL over LocoNet.

Parts List

1 BXP88

1 Instruction Manual

Digitrax Manuals and Instructions are updated periodically.

Please visit www.digitrax.com for the latest version of all manuals.

Complete Train Control

Run Your Trains, Not Your Track!

— 1 —

All Scales

1 LT5 Tester