Argonaut R515 참조 매뉴얼 - 페이지 12

{카테고리_이름} Argonaut R515에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argonaut R515 20 페이지. Led marine monitor

페이지 인쇄

Troubleshooting

Problem & Question

Power LED is not on

No Plug & Play

Picture is Fuzzy

Picture bounces or wave

pattern is present in the

picture

The Power LED is

ON(Amber) but there's no

video or no picture

Discolored Image (RED,

GREEN, or BLUE)

Screen image is not

centered or sized properly.

Picture has color defects

(white does not look white)

Horizontal or vertical

disturbances on the screen

Image is dim

Monitor Turns Off

Possible Solution

*Confirm power supply output.

*Check power connection.

*Check if the PC System is Plug & Play

compatible

*Check if the Video Card is Plug & Play

compatible

*Press Reset in OSD.

*Move electrical devices that may cause

electrical interference.

*Verify input signal.

*Make sure cables are properly

connected.

* Inspect input cables for damage.

*Confirm the input source is operational

by connecting a separate monitor to the

source.

* Inspect the monitor's video or DVI

cable and make sure that none of the pins

are bent or corroded.

* Press Reset Position in OSD.

* Press Reset Color in OSD.

* Press Reset in OSD.

* Adjust brightness control.

* Confirm minimum voltage to regulator.

Page