Argonaut R515 Referentiehandleiding - Pagina 12

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Argonaut R515. Argonaut R515 20 pagina's. Led marine monitor

Pagina afdrukken

Troubleshooting

Problem & Question

Power LED is not on

No Plug & Play

Picture is Fuzzy

Picture bounces or wave

pattern is present in the

picture

The Power LED is

ON(Amber) but there's no

video or no picture

Discolored Image (RED,

GREEN, or BLUE)

Screen image is not

centered or sized properly.

Picture has color defects

(white does not look white)

Horizontal or vertical

disturbances on the screen

Image is dim

Monitor Turns Off

Possible Solution

*Confirm power supply output.

*Check power connection.

*Check if the PC System is Plug & Play

compatible

*Check if the Video Card is Plug & Play

compatible

*Press Reset in OSD.

*Move electrical devices that may cause

electrical interference.

*Verify input signal.

*Make sure cables are properly

connected.

* Inspect input cables for damage.

*Confirm the input source is operational

by connecting a separate monitor to the

source.

* Inspect the monitor's video or DVI

cable and make sure that none of the pins

are bent or corroded.

* Press Reset Position in OSD.

* Press Reset Color in OSD.

* Press Reset in OSD.

* Adjust brightness control.

* Confirm minimum voltage to regulator.

Page