Cisco PIX-515E 빠른 시작 매뉴얼 - 페이지 21

{카테고리_이름} Cisco PIX-515E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco PIX-515E 42 페이지. Security appliance
Cisco PIX-515E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (42 페이지)

페이지 인쇄

Step 2: Provide information about the VPN peer.

The VPN peer is the system on the other end of the connection, usually at a remote site.

Provide information about the VPN peer. In this scenario, the VPN peer is PIX security appliance 2

(from this point forward referred to as PIX 2).

1. Enter the Peer IP address (for PIX 2) and a tunnel group name.

2. Specify the type of authentication that you want to use by performing one of the following:

To use a pre-shared key for authentication (for example, "CisCo"), click the Pre-Shared Key

–

radio button, and enter a pre-shared key, which is shared for IPSec negotiations between both

security appliances.

When you configure the PIX 2 at the remote site, the VPN peer is PIX 1. Be sure to

Note

enter the same Pre-shared Key (CisCo) that you use here.

To use digital certificates for authentication, click the Certificate radio button, and then

–

choose a Trustpoint Name from the drop-down menu.

3. Click the Next button to continue.