Cisco PIX-515E Manual de início rápido - Página 21

Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Cisco PIX-515E. Cisco PIX-515E 42 páginas. Security appliance
Também para Cisco PIX-515E: Manual de início rápido (42 páginas)

Imprimir página

Step 2: Provide information about the VPN peer.

The VPN peer is the system on the other end of the connection, usually at a remote site.

Provide information about the VPN peer. In this scenario, the VPN peer is PIX security appliance 2

(from this point forward referred to as PIX 2).

1. Enter the Peer IP address (for PIX 2) and a tunnel group name.

2. Specify the type of authentication that you want to use by performing one of the following:

To use a pre-shared key for authentication (for example, "CisCo"), click the Pre-Shared Key

–

radio button, and enter a pre-shared key, which is shared for IPSec negotiations between both

security appliances.

When you configure the PIX 2 at the remote site, the VPN peer is PIX 1. Be sure to

Note

enter the same Pre-shared Key (CisCo) that you use here.

To use digital certificates for authentication, click the Certificate radio button, and then

–

choose a Trustpoint Name from the drop-down menu.

3. Click the Next button to continue.