Cisco SCE 1000 and 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} Cisco SCE 1000 and에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SCE 1000 and 49 페이지. Service control engine 1000 2xgbe

페이지 인쇄

Passwords are case sensitive.

Note

The default password for all levels is "Cisco".

Note

Configure the User password

Step 1

The default User password is displayed.

To accept the displayed value, press Enter.

–

To change the value, type the desired string and press Enter.

–

Step 2

Configure the Admin password.

The default Admin password is displayed.

To accept the displayed value, press Enter.

–

To change the value, type the desired string and press Enter.

–

Configure the Root password.

Step 3

The default Root password is displayed.

To accept the displayed value, press Enter.

–

To change the value, type the desired string and press Enter.

–

Step 4

Configure password encryption. By default, password encryption is not enabled.

To disable password encryption, press Enter.

–

To enable password encryption, type y and press Enter.

–

EXAMPLE:

Following is an example of changing all passwords. Password encryption is not enabled (default).

Enter a User password [Cisco]: userin

Enter an Admin password [Cisco]: mng123

Enter a Root password [Cisco]: cistech

Enable passwords encryption? [no]:

Step 4: Configuring Time Settings

The time settings menu configures all time and date related parameters in the system. The time settings menu includes the

following:

• Time zone

• Local time

• Date

• SNTP menu

You must enter the time setting menu to configure SNTP settings. You may choose to skip the time settings menu if you wish to

accept all default values.

Note

Unlike all other settings defined in the system configuration, setting the time is done immediately and not at the end of

the setup process.