Cisco SCE 1000 and Quick Start Manual - Page 18

Browse online or download pdf Quick Start Manual for Network Hardware Cisco SCE 1000 and. Cisco SCE 1000 and 49 pages. Service control engine 1000 2xgbe

Print Page
Cisco SCE 1000 and Quick Start Manual
Passwords are case sensitive.
Note
The default password for all levels is "Cisco".
Note
Configure the User password
Step 1
The default User password is displayed.
To accept the displayed value, press Enter.
–
To change the value, type the desired string and press Enter.
–
Step 2
Configure the Admin password.
The default Admin password is displayed.
To accept the displayed value, press Enter.
–
To change the value, type the desired string and press Enter.
–
Configure the Root password.
Step 3
The default Root password is displayed.
To accept the displayed value, press Enter.
–
To change the value, type the desired string and press Enter.
–
Step 4
Configure password encryption. By default, password encryption is not enabled.
To disable password encryption, press Enter.
–
To enable password encryption, type y and press Enter.
–
EXAMPLE:
Following is an example of changing all passwords. Password encryption is not enabled (default).
Enter a User password [Cisco]: userin
Enter an Admin password [Cisco]: mng123
Enter a Root password [Cisco]: cistech
Enable passwords encryption? [no]:

Step 4: Configuring Time Settings

The time settings menu configures all time and date related parameters in the system. The time settings menu includes the
following:
• Time zone
• Local time
• Date
• SNTP menu
You must enter the time setting menu to configure SNTP settings. You may choose to skip the time settings menu if you wish to
accept all default values.
Note
Unlike all other settings defined in the system configuration, setting the time is done immediately and not at the end of
the setup process.
18