Cisco SCE8000 GBE 설치 - 페이지 14

{카테고리_이름} Cisco SCE8000 GBE에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SCE8000 GBE 21 페이지. 10gbe platform
Cisco SCE8000 GBE에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지), 구성 매뉴얼 (18 페이지), 제거 및 교체 절차 (36 페이지)

페이지 인쇄

Installing the Cisco SCE8000 Chassis in the Rack

This section describes how to install a Cisco SCE8000 platform in a rack. For first-time installations,

perform the procedures in the following sections in the order listed:

•

Before starting the installation procedures in this chapter, see the

Note

page 4-12 to verify that all site planning activities were completed.

Unpacking the Cisco SCE8000 Chassis

Tip

Do not discard the shipping container when you unpack the Cisco SCE8000. Flatten the shipping cartons

and store them with the pallet. You need these containers to move or ship the Cisco SCE8000.

Perform the following to check the contents of the shipping container:

•

Cisco SCE8000 10GBE Installation and Configuration Guide

4-14

Unpacking the Cisco SCE8000 Chassis, page 4-14

Installation Guidelines, page 4-15

Required Tools, page 4-15

Installing the Chassis Brackets, page 4-16

Installing the Chassis in the Rack, page 4-16

Installing an Optical Bypass Module, page 4-18

Check the contents of the accessories kit against the list of accessories in the

Component and Accessory

all listed equipment, which should include the following:

Hardware and software documentation, if ordered

–

Optional equipment that you ordered, such as network interface cables, transceivers, or special

–

connectors

Check the modules in each slot. Ensure that the configuration matches the packing list and that all

the specified interfaces are included.

Lists" section on page 2-13 and the packing slip. Verify that you received

Chapter 4 Installing the Cisco SCE8000 Chassis

"Site Planning

Checklist" section on

"Cisco SCE8000

OL-21054-04