Cisco TelePresence MCU 4500 Series 시작하기 - 페이지 11

{카테고리_이름} Cisco TelePresence MCU 4500 Series에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence MCU 4500 Series 18 페이지. Multipoint control units
Cisco TelePresence MCU 4500 Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (15 페이지)

페이지 인쇄

Click

Apply changes

Before you configure the MCU to use, and register conferences to, a SIP

registrar, you must set up the MCU and its conferences on that SIP

registrar.

Step three: Add endpoints (optional)

One way to add participants to a conference that you create is to have the MCU

automatically call them when the conference starts. To do this, you configure their

endpoints on the MCU. When you set up a conference, you can choose the

endpoints from the

each endpoint's details every time. Participants that are pre-configured for a

conference will automatically be called by the MCU to join that conference.

To define pre-configured endpoints:

In the web interface of the MCU, go to

To add a H.323 endpoint, click



To add a SIP endpoint, click



To add a VNC screen, click



Configure the endpoint settings you require, using the online help for further

assistance.

Click

Add endpoint

Pre-configured participants

Add VNC

list. This is easier than entering

Endpoints

Add H.323

Add SIP

Configuring the MCU