Cisco TelePresence MCU 4500 Series 시작하기 - 페이지 12

{카테고리_이름} Cisco TelePresence MCU 4500 Series에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence MCU 4500 Series 18 페이지. Multipoint control units
Cisco TelePresence MCU 4500 Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (15 페이지)

페이지 인쇄

Using the MCU

Creating conferences

To create a conference:

In the web interface of the MCU, go to

conference

Type a

Name

Type an optional numeric identifier, for example

telephone number that participants can use to join the conference when calling

in to the MCU via a gatekeeper or SIP registrar.

There are two types of conference participant: chairperson and guest.

IDs and PINs allow participants to connect to conferences as the correct

participant type. Chairperson participants use the Numeric ID and

optionally, the PIN; guest participants use the Guest numeric ID and

optionally, the Guest PIN. For more information, refer to the online help.

If you are using a gatekeeper, select

registrar, select

Ensure the

Maximum duration

hour).

All other values can be left at their default settings. Refer to the online help for

further information about the available settings.

Note that if you do not configure the conference to start immediately, it

will become a scheduled conference and will be inactive until its start

time.

Scroll down and click

The conference you have created is now active (if you used the default immediate

start time) and participants can join in one of two ways: either the MCU can call out

to specified endpoints or endpoints can dial in. Any endpoints that have been added

to a conference, as pre-configured participants, will be called in to the conference by

the MCU.

for the conference, for example SalesMeeting.

SIP registrar

Add conference

Conferences

123

H.323 gatekeeper

of the conference is sufficient (the default is one

Using the MCU

and click

Add new

. This will be the

; if you are using a SIP