Cisco 2500 Series 배포 매뉴얼 - 페이지 15

{카테고리_이름} Cisco 2500 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 23 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 구성 매뉴얼 (50 페이지), 시작하기 매뉴얼 (47 페이지)

페이지 인쇄

Port Country Priority

−−−− −−−−−−− −−−−−−

The APs that have joined the controller can also be verified by verifying the APs summary on the controller.

Configure both the AP name and the Location of the AP install.

Prime the AP by configuring the controller name and IP address under High Availability.

With this configuration, the AP will join the configured controller as the first preference.

External DHCP Server with DHCP Proxy Disabled

This is a general setup that has been in practice for all Cisco controllers for some deployments. The

configurations are almost the same as noted in the previous, but will have the DHCP Proxy disabled.

The AP−manager interfaces in this scenario point to an external DHCP server.

Note: It is recommended to enable either an internal DHCP server or an external DHCP server.

ip dhcp excluded−address 10.10.11.1 10.10.11.150

ip dhcp pool VLAN11