Cisco 2500 Series 배포 매뉴얼 - 페이지 17
{카테고리_이름} Cisco 2500 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 23 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 구성 매뉴얼 (50 페이지), 시작하기 매뉴얼 (47 페이지)
One more DHCP scope is configured on the controller. This configured DHCP Scope TestVlan11 is mapped
to the dynamic−interface configured on the controller.
<CISCO2504> >show dhcp summary
Scope Name
TestVlan10
TestVlan11
<CISCO2504> >show dhcp detailed TestVlan11
Scope: TestVlan10
Enabled................................... Yes
Lease Time................................ 36400 <10 hours 6 minutes 40 seconds>
Pool Start................................ 10.10.11.100
Pool End.................................. 10.10.11.200
Network................................... 10.10.11.0
Netmask................................... 255.255.255.0
Default Routers........................... 10.10.11.10
DNS Domain................................
DNS....................................... 0.0.0.0
Netbios Name Servers...................... 0.0.0.0
<CISCO2504> >
Internal DHCP Server with DHCP Proxy Enabled
By default, the DHCP Proxy is enabled on the controller as seen in one of the previous captures. Dynamic
interface dynamic11 is configured and is mapped to VLAN11. The interface is also mapped to the configured
internal DHCP server. The dynamic interface is not enabled for dynamic AP management.
Enabled
Address Range
Yes
10.10.10.100 −> 10.10.10.200
Yes
10.10.11.100 −> 10.10.11.200
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0