Cisco 2500 Series 배포 매뉴얼 - 페이지 2
{카테고리_이름} Cisco 2500 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 23 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 구성 매뉴얼 (50 페이지), 시작하기 매뉴얼 (47 페이지)
페이지 인쇄
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco 2500 Series Wireless Controller.
Hardware Specifications
•
Data Ports 4 x 1 Gigabit Ethernet Ports
•
Console Port 1 x RJ45
•
External 48V Power Supply
Software Specifications
•
Feature parity with Cisco 2100 Series Wireless Controllers
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Additional Features
•
Support for Control and Provisioning of Wireless Access Points (CAPWAP) protocol
•
Encryption on CAPWAP Data Tunnel (DTLS) (optional)
•
License−based AP count. AP Counts − 50 (in steps of 5, 25, 50)
•
Supported Client Count − 500 (In all STATE)
•
Supported Tag Count − 500
•
Triple Play Ready − Supports Data, Voice and Video
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Hardware Architecture of Cisco 2500 Series Wireless
Controller
These sections provide a greater insight into the architecture of the new Cisco 2500 Series Wireless
Controller.
The Cisco 2500 Series Wireless Controller physically has the same form factor as the Cisco 2106 controller.
The CPU on a Cisco 2500 Series Wireless Controller is a multi−core CPU and can handle both data plane and
wireless data traffic. The CPU can handle control plane application, which handles all the management traffic
needed to control a wireless network.