Cisco 2500 Series 배포 매뉴얼 - 페이지 6

{카테고리_이름} Cisco 2500 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 23 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 구성 매뉴얼 (50 페이지), 시작하기 매뉴얼 (47 페이지)

페이지 인쇄
Cisco 2500 Series 배포 매뉴얼
Configuration saved!
Resetting system with new configuration...
Restarting system.
Note: The above configuration is an example. It may differ from one install to another.
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.116.0
Bootloader Version............................... 1.0.11
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 14.0
Build Type....................................... DATA + WPS
System Name...................................... Szabla
System Location.................................. SJC14−Area51
System Contact................................... TME−admin
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 10.10.10.20
Last Reset....................................... Software reset
System Up Time................................... 0 days 2 hrs 34 mins 29 secs
System Timezone Location......................... (GMT −8:00) Pacific Time (US
and Canada)
Current Boot License Level....................... base
Current Boot License Type........................ Default. No valid license
found.
Next Boot License Level.......................... base
Next Boot License Type........................... Default. No valid license
found.
Configured Country............................... US − United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +33 C
External Temperature............................. +35 C
Fan Status....................................... 3168 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 0
Burned−in MAC Address............................ 00:22:BD:D9:24:E0
Maximum number of APs supported.................. 50
(Cisco Controller) >

License Installation

The Cisco 2500 Series Wireless Controller does not have any licenses installed. Without any installed
licenses, the APs will not be able to join the controller. It is recommended to install appropriate licenses on
the Cisco 2500 Series Wireless Controller in order to work with the controller going forward. The Cisco 2500
Series Wireless Controller is shipped with an evaluation license for a period of 60 days (that is, 8 weeks 4
days). The evaluation license is a base license only.
The ordered license can be installed on the controller using either the CLI or the GUI. The license installed
can be checked through both the CLI and the GUI. In both cases, there should be a TFTP server hosting the
license files.
(Cisco Controller) >license install ?
<url>
tftp://<server ip>/<path>/<filename>