Cisco 2500 Series 배포 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 2500 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 23 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 구성 매뉴얼 (50 페이지), 시작하기 매뉴얼 (47 페이지)

페이지 인쇄
Cisco 2500 Series 배포 매뉴얼
(Cisco Controller)
The show license all command displays the installed licenses.
Note: This license includes a data DTLS functionality.
(Cisco Controller) >show license all
(Cisco Controller) >show license all
License Store: Primary License Storage
StoreIndex:
License Type: Permanent
License State: Active, In Use
License Count: 50/50/0
License Priority: Medium
StoreIndex:
License Type: Permanent
License State: Active, In Use
License Count: Non−Counted
License Priority: Medium
License Store: Evaluation License Storage
StoreIndex:
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non−Counted
License Priority: Low
StoreIndex:
License Type: Evaluation
License State: Inactive
License Count: 50/0/0
License Priority: None
(Cisco Controller) >

Enable DTLS in the Cisco 2500 Series Controller

In order to enable DTLS on an AP or particularly on a group of APs, make sure that you have Data
Encryption License installed in the controller. DTLS (Data Encryption) can be enabled on a per AP basis from
the Advanced tab once you select the AP details.
Choose an AP, go to the Advanced tab, and choose the Data Encryption option.
2
Feature: base−ap−count
3
Feature: data encryption
0
Feature: base
Evaluation total period:
Evaluation period left:
1
Feature: base−ap−count
Evaluation total period:
Evaluation period left:
Version: 1.0
Version: 1.0
Version: 1.0
8 weeks
4 days
8 weeks
4 days
Version: 1.0
8 weeks
4 days
8 weeks
4 days