Cisco 2500 Series 구성 매뉴얼 - 페이지 27

{카테고리_이름} Cisco 2500 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 50 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 배포 매뉴얼 (23 페이지), 시작하기 매뉴얼 (47 페이지)

페이지 인쇄

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

Media (Voice/Video)

For 84-Series handsets Admission Control (ACM) must be enabled on both the Voice and Video

AC when the handset is configured for Admission Control Mandatory. PIVOT handsets support

Admission Control on PIVOT R1.5 and later.

To enable Admission Control (ACM):

In the navigation pane under 802.11 b/g/n, select Media, then select the Voice tab.

Select the Admission Control (ACM) checkbox. If CAC Method is available, select

Static from the drop down list. Set the Max RF Bandwidth to 50 for 84- and PIVOT

handsets to limit the bandwidth allocated to handsets to a value tested to provide good

performance. If available, ensure that the Reserved Roaming Bandwidth is set to 6%.

Admin Tip: Use the Static CAC Method.

It is very important to choose the Static CAC method to avoid limiting calls when

there is heavy background traffic.

Admin Tip: Disable WLAN before changing Admission Control settings.

Any WLAN using the network must be disabled before changing Admission Control

settings.

721-1001-000-AH.docx

December 2016