Cisco 7513 Series 매뉴얼 - 페이지 26

{카테고리_이름} Cisco 7513 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7513 Series 30 페이지. Chassis replacement
Cisco 7513 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (44 페이지), 교체 지침 매뉴얼 (26 페이지), 데이터시트 (11 페이지), 유지 관리 (20 페이지), 교체 지침 매뉴얼 (19 페이지), 교체 지침 매뉴얼 (22 페이지)

Replacing or Upgrading the Chassis

Enter the show version command to display the current system software version, and enter the show

controllers cxbus command to display the microcode version of the RSP and each interface

processor. The following is an example of the show version command.

Following is an example of the show controller cbus command display. (In this example, ROM

Version 1.0 is assumed because you cannot determine the ROM version with screen displays unless

it is the running version.)

The command show interfaces serial slot/port displays statistics for the speciﬁc serial interface you

specify by its slot/port address. If you enter this command without the type and slot/port arguments,

the system will display statistics for all interfaces in the system.

26 Cisco 7513 and Cisco 7576 Chassis Replacement and Upgrade Instructions

Router> show version

GS Software (RSP-K), Version 10.3(571), SOFTWARE

Compiled Wed 10-May-95 14:46 by mpo

System Bootstrap, Version 4.6(1) [fc2], SOFTWARE

Current date and time is Sat 1-22-1994 21:38:35

Boot date and time is Tue 12-28-1993 15:32:28

Router uptime is 3 weeks, 4 days, 6 hours, 7 minutes

System restarted by reload

System image file is "gs7-k.103-1", booted via tftp from 1.1.1.12

(example text omitted

X.25 software, Version 2.0, NET2 and BFE compliant.

Bridging software.

1 EIP controller (6 Ethernet).

1 TRIP controller (4 Token Ring).

6 Ethernet/IEEE 802.3 interfaces.

4 Token Ring/IEEE 802.5 interfaces.

(remainder of example text omitted)

Router# show controllers cbus

(text omitted from example)

FSIP 1, hardware version 1.0, microcode version 1.0

Interface 8 - Serial1/0, electrical interface is V.35 DTE

(text omitted from example)

Interface 9 - Serial1/1, electrical interface is V.35 DTE

(remainder of displayed text omitted from example)

Router> show int hssi 1/0

Hssi 1/0 is up, line protocol is up

Hardware is cxBus HIP

Internet address is 1.1.1.9, subnet mask is 255.255.255.0

(display text omitted)