Cisco AS5200 - Universal Access Server 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} Cisco AS5200 - Universal Access Server에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5200 - Universal Access Server 20 페이지. Universal access server
Cisco AS5200 - Universal Access Server에 대해서도 마찬가지입니다: 릴리스 정보 (22 페이지)

페이지 인쇄

Cisco AS5200 - Universal Access Server 빠른 시작 매뉴얼

Install the Universal Access Server (continued)

RJ-45-to-RJ-45

rollover cable

Connect to a Console for Local

Administrative Access

You will need an RJ-45-to-RJ-45 rollover cable and

a terminal adapter (RJ-45-to-DB-9 or

RJ-45-to-DB-25) to connect a console. These cables

and adapters are included. Take these steps:

Step 1

Connect one of the adapters, labeled

TERMINAL, to the communications port

(usually labeled COM) on your

PC or terminal. (This communications

port is also known as a console.)

Universal access server

Console port (RJ-45)

(labeled CONSOLE)

Step 2

Step 3

Step 4

(laptop)

RJ-45-to-DB-9 or

RJ-45-to-DB-25 adapter

(labeled TERMINAL)

Connect one end of the RJ-45-to-RJ-45

rollover cable to the adapter.

Connect the other end of the

RJ-45-to-RJ-45 rollover cable to the port

labeled CONSOLE on the rear panel of

the access server.

Conﬁgure your PC terminal emulation

software or terminal for 9600 baud, 8

data bits, no parity, and 1 stop bit.