Cisco AS5200 - Universal Access Server 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Cisco AS5200 - Universal Access Server에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5200 - Universal Access Server 20 페이지. Universal access server
Cisco AS5200 - Universal Access Server에 대해서도 마찬가지입니다: 릴리스 정보 (22 페이지)

페이지 인쇄

Cisco AS5200 - Universal Access Server 빠른 시작 매뉴얼

Install the Universal Access Server (continued)

Connect a Modem for Remote

Administrative Access

(Optional)

To conﬁgure the access server from a remote

location, you will need an RJ-45-to-RJ-45 rollover

cable and a modem adapter (RJ-45-to-DB-25) to

connect a modem.

If you will not be using a modem to conﬁgure the

access server remotely, skip this procedure and go to

the next page.

RJ-45-to-RJ-45

rollover cable

Universal access server

Auxiliary port (RJ-45)

(labeled AUX)

RJ-45-to-DB-25 adapter

Note: The cable and adapter are included. The

modem is not included.

Step 1

Connect the adapter labeled MODEM to

your modem.

Step 2

Connect the RJ-45-to-RJ-45 rollover

cable to the adapter.

Step 3

Connect the other end of the

RJ-45-to-RJ-45 rollover cable to the port

labeled AUX on the rear panel of the

access server.

Modem

(labeled MODEM)