- ページ 12

サーバー Cisco AS5200 - Universal Access ServerのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco AS5200 - Universal Access Server 20 ページ。 Universal access server
Cisco AS5200 - Universal Access Server にも：リリースノート (22 ページ)

ページを印刷する

Cisco AS5200 - Universal Access Server クイック・スタート・マニュアル

Install the Universal Access Server (continued)

Connect a Modem for Remote

Administrative Access

(Optional)

To conﬁgure the access server from a remote

location, you will need an RJ-45-to-RJ-45 rollover

cable and a modem adapter (RJ-45-to-DB-25) to

connect a modem.

If you will not be using a modem to conﬁgure the

access server remotely, skip this procedure and go to

the next page.

RJ-45-to-RJ-45

rollover cable

Universal access server

Auxiliary port (RJ-45)

(labeled AUX)

RJ-45-to-DB-25 adapter

Note: The cable and adapter are included. The

modem is not included.

Step 1

Connect the adapter labeled MODEM to

your modem.

Step 2

Connect the RJ-45-to-RJ-45 rollover

cable to the adapter.

Step 3

Connect the other end of the

RJ-45-to-RJ-45 rollover cable to the port

labeled AUX on the rear panel of the

access server.

Modem

(labeled MODEM)