Cisco AS5200 - Universal Access Server Manual de inicio rápido - Página 12
Navegue en línea o descargue pdf Manual de inicio rápido para Servidor Cisco AS5200 - Universal Access Server. Cisco AS5200 - Universal Access Server 20 páginas. Universal access server
También para Cisco AS5200 - Universal Access Server: Notas de publicación (22 páginas)
2
Install the Universal Access Server (continued)
10
Connect a Modem for Remote
Administrative Access
(Optional)
To configure the access server from a remote
location, you will need an RJ-45-to-RJ-45 rollover
cable and a modem adapter (RJ-45-to-DB-25) to
connect a modem.
If you will not be using a modem to configure the
access server remotely, skip this procedure and go to
the next page.
RJ-45-to-RJ-45
rollover cable
Universal access server
Auxiliary port (RJ-45)
(labeled AUX)
RJ-45-to-DB-25 adapter
Note: The cable and adapter are included. The
modem is not included.
Step 1
Connect the adapter labeled MODEM to
your modem.
Step 2
Connect the RJ-45-to-RJ-45 rollover
cable to the adapter.
Step 3
Connect the other end of the
RJ-45-to-RJ-45 rollover cable to the port
labeled AUX on the rear panel of the
access server.
Modem
(labeled MODEM)