Cisco AS5300 - Universal Access Server 빠른 시작 매뉴얼 - 페이지 15
{카테고리_이름} Cisco AS5300 - Universal Access Server에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5300 - Universal Access Server 25 페이지. Access server
Cisco AS5300 - Universal Access Server에 대해서도 마찬가지입니다: 부록 (10 페이지), 구성 매뉴얼 (46 페이지), 매뉴얼 (21 페이지)
페이지 인쇄
3
Gather Configuration Information
Use this section to help gather and organize the information you need to run the setup script to configure your Cisco AS5300.
The information in the table is not an exhaustive list, but provided only as a starting point when using the setup script.
Note If you do not have this information, you can get it from your network administrator.
Item
Ask Your Network Administrator
What do you want to name the Cisco AS5300 (to
1.
distinguish it from other Cisco devices on your
network)?
What do you want the encrypted enable secret
2.
password to be? (Note:
seen when viewing the configuration and
therefore is more secure.)
What do you want the nonencrypted enable
3.
password to be? (
viewing the configuration and therefore is less
secure.)
4.
What do you want the password for remote console
access to be? This is referred to as the virtual
terminal password.
Do you want to configure the Cisco AS5300 for:
5.
SNMP? If so,
• What is the public (read-only) community
string?
• What is the private (read-write) community
string?
LAT?
AppleTalk?
• AppleTalk multizone networks?
• What are the AppleTalk zone names?
• What are the AppleTalk network numbers?
DECNet?
IP?
IGRP routing?
• What is the IGRP autonomous system number?
CLNS?
IPX?
• What are the IPX network numbers?
VINES?
XNS?
Apollo?
Bridging?
This password cannot be
This password can be seen when
Enter the Information in This Column
15