Epson ActionLaser 1600 첫 번째 매뉴얼 읽기 - 페이지 14

{카테고리_이름} Epson ActionLaser 1600에 대한 첫 번째 매뉴얼 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionLaser 1600 26 페이지. Epson actionlaser 1600: quick start
Epson ActionLaser 1600에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 제품 사양 (2 페이지)

페이지 인쇄

Fasten the other end of the cable to your computer.

For the parallel connector, squeeze the wire clips together

until they lock in place on either side of the connector.

For the serial connector, use a screwdriver to fasten the

screws of the connector, if required.

Insert the interface cable into the U-shaped part of one cable

clip. Lift the left side of the printer up slightly. Then hook

the short lip of the clip into the forward slot and push the

bottom of the clip under the printer until it clicks in place.

Repeat this procedure with the second clip and insert it into

the back slot.

By default, the printer is set up to print letter-size paper from

the standard paper feeder. If you are printing onto any other

size of paper, you need to change the paper tray% paper size

setting. See Chapter 2 in the Reference Guide for more

information.

If you are using the serial interface, see 'Using the serial

interface" at the end of step 8.