Epson ActionLaser 1600 첫 번째 매뉴얼 읽기 - 페이지 15

{카테고리_이름} Epson ActionLaser 1600에 대한 첫 번째 매뉴얼 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionLaser 1600 26 페이지. Epson actionlaser 1600: quick start
Epson ActionLaser 1600에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 제품 사양 (2 페이지)

페이지 인쇄
Epson ActionLaser 1600 첫 번째 매뉴얼 읽기
If you are using the parallel interface port, use the following
procedure to make sure you properly connected your
computer to the printer. If you are using the serial interface or
an optional interface, skip this procedure.
1. Turn on your computer; then turn on your printer.
2. Bring up a DOS prompt on your computer screen such as:
3. Type the following
PRINT AUTOEXEC.BAT
The computer displays the following message:
NAME OF LIST DEVICE (PRN):
4. Type the following:
LPT1
The printer prints the AUTOEXEC.BAT file.
If nothing prints or the results are not what you expect, make
sure you used the proper cable, that the cable is connected
securely to both the computer and the printer, and that you
used the correct interface.