Cisco C880 M4 펌웨어 업데이트 매뉴얼 - 페이지 2

{카테고리_이름} Cisco C880 M4에 대한 펌웨어 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C880 M4 5 페이지. System event log collection
Cisco C880 M4에 대해서도 마찬가지입니다: 서비스 보충 설명서 (27 페이지), 하드웨어 설치 매뉴얼 (23 페이지), 운영 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Offline Firmware Update Procedure

Step 1

Step 2

From the Navigation bar, choose System.

Step 3

Power off the system (but do not disconnect the AC power).

Step 4

From the Navigation bar, choose Maintenance.

Step 5

Choose Firmware Update > Unified Firmware Update.

Step 6

Choose the firmware file.

Step 7

Click Update.

Wait for the firmware version check window to appear, which takes approximately 5 minutes.

Step 8

Click OK after confirming the firmware version.

The progress bar appears in about 1 minute.

• The time required to update the firmware for a one MMB configuration is about 70 minutes.

• For a one MMB configuration, wait about 5 minutes before logging into the web UI . The web UI is disconnected

during the firmware update.

Online Firmware Update Procedure

Before You Begin

Before starting the update, ensure that the system is in boot state and the OS is not running.

Step 1

Step 2

From the Navigation bar, choose Maintenance.

Step 3

Choose Firmware Update > Unified Firmware Update.

Step 4

Choose the firmware file.

Step 5

Click Update.

Wait for the firmware version check window to appear, which takes approximately 5 minutes.

Step 6

Click OK after confirming the firmware version.

The progress bar appears in about 1 minute. The time required to update the firmware for a one MMB configuration is

about 70 minutes.

This online firmware update procedure writes a new version of the firmware to the ROM device. To apply the

Note

new firmware to the system, power off the server and power it on again.

While the new firmware is being applied to the system, the web UI is disconnected. Wait about 5 minutes before logging

into the web UI.

Cisco C880 M4 Server Firmware Update Guide

Introduction