Cisco Firepower 1120 하드웨어 설치 매뉴얼 - 페이지 41

{카테고리_이름} Cisco Firepower 1120에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Firepower 1120 42 페이지. Connected grid router
Cisco Firepower 1120에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (30 페이지), 설치 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (10 페이지), 매뉴얼 (6 페이지), 배포 매뉴얼 (8 페이지), 시작하기 (42 페이지), 하드웨어 설치 매뉴얼 (42 페이지)

Installation, Maintenance, and Upgrade

Figure 29: TELs Placement on the Chassis

TEL 1 on the left side and top of chassis

TEL 3 on the top and back of chassis

TEL 5 across the FIPS shield and the chassis (towards

the right of the chassis)

TEL 7 on the bottom of the chassis towards the right

side of the chassis

Step 9

Attach the power cable to the chassis and connect it to an electrical outlet.

Step 10

Press the power switch on the rear panel.

Step 11

Check the power LED on the front panel. See

green indicates that the chassis is powered on.

Step 12

Place the chassis in FIPS mode.

See the following procedures for how to place the chassis in FIPS mode:

•

ASA in Platform Mode

•

ASA in Appliance mode

Install the FIPS Opacity Shield in a Two-Post Rack

TEL 2 on the right side and top of chassis

TEL 4 across the FIPS shield and the chassis (towards

the left of the chassis)

TEL 6 on the bottom of the chassis towards the left

side of the chassis

—

Rear Panel LEDs, on page 9

Cisco Firepower 1100 Series Hardware Installation Guide

for a description of the power LED. Solid