Cisco Firepower 1120 Donanım Kurulum Kılavuzu - Sayfa 41

Sunucu Cisco Firepower 1120 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco Firepower 1120 42 sayfaları. Connected grid router
Ayrıca Cisco Firepower 1120 için: Donanım Kurulum Kılavuzu (30 sayfalar), Kurulum Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Manuel (6 sayfalar), Dağıtım Kılavuzu (8 sayfalar), Başlarken (42 sayfalar), Donanım Kurulum Kılavuzu (42 sayfalar)

Cisco Firepower 1120 Donanım Kurulum Kılavuzu
Installation, Maintenance, and Upgrade
Figure 29: TELs Placement on the Chassis
1
TEL 1 on the left side and top of chassis
3
TEL 3 on the top and back of chassis
5
TEL 5 across the FIPS shield and the chassis (towards
the right of the chassis)
TEL 7 on the bottom of the chassis towards the right
7
side of the chassis
Step 9
Attach the power cable to the chassis and connect it to an electrical outlet.
Step 10
Press the power switch on the rear panel.
Step 11
Check the power LED on the front panel. See
green indicates that the chassis is powered on.
Step 12
Place the chassis in FIPS mode.
See the following procedures for how to place the chassis in FIPS mode:
ASA in Platform Mode
ASA in Appliance mode
Install the FIPS Opacity Shield in a Two-Post Rack
2
TEL 2 on the right side and top of chassis
4
TEL 4 across the FIPS shield and the chassis (towards
the left of the chassis)
6
TEL 6 on the bottom of the chassis towards the left
side of the chassis
Rear Panel LEDs, on page 9
Cisco Firepower 1100 Series Hardware Installation Guide
for a description of the power LED. Solid
37