Epson CX5000 - Stylus Color Inkjet 매뉴얼 - 페이지 10

{카테고리_이름} Epson CX5000 - Stylus Color Inkjet에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX5000 - Stylus Color Inkjet 19 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson CX5000 - Stylus Color Inkjet에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (8 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 업데이트 (1 페이지), 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

Epson Stylus CX5000 Series

5. Make sure the

Print From Index Sheet

light is on.

6. Select

Plain Paper

Photo Paper

(whichever you loaded). If you select

, your photos print with a white

Paper

border. If you select

Photo Paper

photos print borderless, to the edge of the

paper.

7. Select

, or

Letter

4"x 6"

paper size.

8. Press the x

Start Color

printing.

Note:

If you need to stop printing, press the y Stop

button.

Printing All Photos or DPOF

Photos

Follow the steps below to print one copy of each photo on the

card or to print only those photos that were pre-selected with

your camera's DPOF (Digital Print Order Format) feature.

1. Make sure your CX5000 Series is not connected to your

computer (or your computer is turned off).

2. Load up to 100 sheets of plain paper or up to 20 sheets of

photo paper at a time (see page 4 for details). You can load

more paper later as necessary to print all your photos.

3. Insert the memory card (see page 8).

4. Press the

Memory Card

the

Print All/PictBridge

Note:

If the memory card does not contain DPOF

information, one copy of all the photos on

the card will be printed.

5. Select

Plain Paper

Photo Paper

(whichever you loaded). If you select

, the photos print with a

Plain Paper

white border. If you select

the photos print borderless, to the edge

of the paper.

6. Select

, or

Letter

4"x 6"

paper size.

7. Press the x

Start Color

printing.

Note:

If you need to stop printing, press the y Stop button.

Plain

, your

for the

5"x 7"

button to start

button until

light comes on.

Photo Paper

for the

5"x 7"

button to start

Printing From a Digital Camera

If your camera is PictBridge

compatible, you can print your JPEG photos by connecting

your digital camera directly to your CX5000 Series. Your

photos must be sized from 80 × 80 pixels to 9200 × 9200

pixels.

1. Make sure your CX5000 Series is not printing.

2. Remove any memory cards from slots.

3. Press the

Memory Card

light comes on.

PictBridge

4. Load the type of paper you want to use (see page 4). Load

enough sheets for the number of photos you'll be printing.

5. Press the paper type button to select

borderless photos (without a white border). Select

if you want your photos printed with a small white

Paper

border.

6. Press the paper size button to select

5"x 7"

7. Connect the USB cable that came with your camera to the

USB connector on the front of your CX5000 Series.

8. Make sure your camera is turned on.

9. Select the photos you want to print with your camera. Then

adjust any necessary settings and print your photos as

explained in your camera manual.

Note:

If your camera is not supported, a flashing P appears in the Copies

window, and the b Error light and the Print All/PictBridge flash.

Epson cannot guarantee the compatibility of any camera.

Depending on the CX5000 Series settings and your digital camera

settings, some combinations of paper type, size, and layout may not

be supported. In addition, some of your digital camera settings may

not be reflected in the printed output.

6/06

™

- or USB DIRECT-PRINT

button until the

Print All/

to print

Photo Paper

Plain

, or

Letter

4"x 6"

™