B2 Audio M 12 소유자 매뉴얼 - 페이지 2
{카테고리_이름} B2 Audio M 12에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. B2 Audio M 12 6 페이지. High performance amplifier
페이지 인쇄Thank you for purchasing the
B2
has through years of dedication introduced our line of competition amplifiers.
B2
The
line up are made to fullfil our philosophy for amplifiers; A variety of applications, highest
possible efficiency and great appearance.
B2
The
amplifiers are designed to produce high power levels even from stock electrical systems.
High efficiency is created from updating every stage through the amplifiers' circuit. High speed
controller chipsets, efficient power devices, precise thermal management and the best engineering
are the cornerstones of the
1. FEATURES
M12
FEATURES
1 ohm stable 2 channel Ultra Class D Mono amplifier
Low Level Input and Output
Frequency response: 20 Hz
Input level 0.2V ~6V
Variable subsonic filter : 10Hz ~ 50Hz at 24dB/ Oct
Variable low pass filter : 35Hz ~ 250Hz at 24dB / Oct
Variable bass boost : 0 ~ 9 dB at 45 Hz
Remote gain controller
Fuse rating : 800 Amps
Working battery voltage : 9V ~ 18V
Minimum Impedance : M12 2ch mode: 1 ohm.
Dimensions ( L x W x H ) : 650 mm x 258 mm x 132 mm
All features are subject to change in the continuing effort to improve the product without notice
B2 M
12 output power
POWER @ 2 OHM
6700 WRMS
9840 WRMS
11700 WRMS
15000 WRMS
2. DESIGN FEATURES
1) M12 will allow stable operation in 2ch mode @ 4/2/1 ohm impedance.
M12 will allow stable operation as a single unit @ impedances down to 2 ohm.
B2
2)
amplifiers offer an advanced protection circuit for the benefit of the user.
Speaker short circuitry, DC offset, Voltage sensor & thermal protection.
B2
3) The
pcb has been designed using a double sided board and features high current mosfet
switching devices.
4) M12 has a 24 dB slope/Oct low pass & subsonic filter.
5) M12 offers a wired remote level control which allows easy gain adjustment from
the drivers seat. In addition the Better Bass Remote can also be used for optimum adjustment.
B2
M12 amplifier for your car audio system.
B2
amplifier series.
~350 Hz
M12 bridged mode: 2 ohm.
, NB: 2ch mode only!
POWER @1OHM
2 x 3350 WRMS
2 x 4920 WRMS
2 x 5850 WRMS
2 x 7500 WRMS
(12,0V,<1% THD)
(14,4V,<1% THD)
(16,0V,<1% THD)
(18,0V,<1% THD)
2