B2 Audio M1u 소유자 매뉴얼 - 페이지 5
{카테고리_이름} B2 Audio M1u에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. B2 Audio M1u 10 페이지. B2 audio class d mono amplifier
B2 Audio M1u에 대해서도 마찬가지입니다: 소유자 매뉴얼 (9 페이지)
페이지 인쇄
2. Panel layout
M1u
GND (GROUND CONNECTION)
For connection to the chassis' ground.
For optimum performance 0 gauge cable is
required, all of them using common ground
connected with cable of equal length.
REM (REMOTE)
Connect to switched +12V from the head unit.
1. Ensure the ground is appropriate, then connect it to the amplifier. 2. Connect the +12V wire,
keep in mind this wire has to be fused at the battery as well. Ensure all input terminals are used
& that fusing is needed at the amplifier also. 3. Connect the switched remote. 4. Reattach the
negative wire (ground) to the battery. 5. Operation over 16 V will caust the amplifier to go into
protect & will eventually void the warranty!
Installation of the amplifier shall be done in the following steps.
+12V (POWER CONNECTION)
For connection to the positive terminal
of the battery (+12V).
For optimum performance 0 gauge cable
is required.
CAUTION
5