B2 Audio M1u Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} B2 Audio M1u. B2 Audio M1u 10 pagina's. B2 audio class d mono amplifier
Ook voor B2 Audio M1u: Gebruikershandleiding (9 pagina's)
Pagina afdrukken
2. Panel layout
M1u
GND (GROUND CONNECTION)
For connection to the chassis' ground.
For optimum performance 0 gauge cable is
required, all of them using common ground
connected with cable of equal length.
REM (REMOTE)
Connect to switched +12V from the head unit.
1. Ensure the ground is appropriate, then connect it to the amplifier. 2. Connect the +12V wire,
keep in mind this wire has to be fused at the battery as well. Ensure all input terminals are used
& that fusing is needed at the amplifier also. 3. Connect the switched remote. 4. Reattach the
negative wire (ground) to the battery. 5. Operation over 16 V will caust the amplifier to go into
protect & will eventually void the warranty!
Installation of the amplifier shall be done in the following steps.
+12V (POWER CONNECTION)
For connection to the positive terminal
of the battery (+12V).
For optimum performance 0 gauge cable
is required.
CAUTION
5