Cisco SCE8000 GBE 구성 매뉴얼 - 페이지 8

{카테고리_이름} Cisco SCE8000 GBE에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SCE8000 GBE 18 페이지. 10gbe platform
Cisco SCE8000 GBE에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지), 제거 및 교체 절차 (36 페이지), 설치 (21 페이지)

페이지 인쇄
Cisco SCE8000 GBE 구성 매뉴얼
Introduction to SIPs and SPAs

The SCE8000-SIP

Table 2-5
Table 2-5
LEDs
Status

The 1-Port 10GBE SPA Interface Module

The SCE8000-SIP is installed in slot #3 of the Cisco SCE8000 chassis. It hosts up to four single-width,
single-height 1-Port 10GBE SPA interface modules, but in the Cisco SCE8000, it must be configured
with either two 1-Port 10GBE SPAs (in the top two subslots) or four 1-Port 10GBE SPAs, to provide
interfaces for either one or two complete traffic links.
module and
Figure 2-6
Cisco SCE8000 10GBE Installation and Configuration Guide
2-8
list the status and description of the SCE8000-SIP LED.
SCE8000-SIP LED
Description
•
Green —Operational
•
Flashing Amber - Electrical bypass in operation
•
Red - Not initialized or failed
Unlit —No power
•
Table 2-6
lists the SPA module ports and
1-Port 10GBE SPA Interface Module
1
Chapter 2
Introduction to the Cisco SCE8000 10GBE Platform
Figure 2-6
provides an illustration of the SPA
Table 2-7
lists the SPA module LEDs.
SPA-1X10GE-L-V2
2
OL-16478-05