Cisco SCE8000 GBE Manuel de configuration - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco SCE8000 GBE. Cisco SCE8000 GBE 18 pages. 10gbe platform
Également pour Cisco SCE8000 GBE : Manuel de démarrage rapide (25 pages), Procédures de retrait et de remplacement (36 pages), Installation (21 pages)

Imprimer la page
Cisco SCE8000 GBE Manuel de configuration
Introduction to SIPs and SPAs

The SCE8000-SIP

Table 2-5
Table 2-5
LEDs
Status

The 1-Port 10GBE SPA Interface Module

The SCE8000-SIP is installed in slot #3 of the Cisco SCE8000 chassis. It hosts up to four single-width,
single-height 1-Port 10GBE SPA interface modules, but in the Cisco SCE8000, it must be configured
with either two 1-Port 10GBE SPAs (in the top two subslots) or four 1-Port 10GBE SPAs, to provide
interfaces for either one or two complete traffic links.
module and
Figure 2-6
Cisco SCE8000 10GBE Installation and Configuration Guide
2-8
list the status and description of the SCE8000-SIP LED.
SCE8000-SIP LED
Description
•
Green —Operational
•
Flashing Amber - Electrical bypass in operation
•
Red - Not initialized or failed
Unlit —No power
•
Table 2-6
lists the SPA module ports and
1-Port 10GBE SPA Interface Module
1
Chapter 2
Introduction to the Cisco SCE8000 10GBE Platform
Figure 2-6
provides an illustration of the SPA
Table 2-7
lists the SPA module LEDs.
SPA-1X10GE-L-V2
2
OL-16478-05