Cisco SNS-3415 series 설치 매뉴얼 - 페이지 19

{카테고리_이름} Cisco SNS-3415 series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SNS-3415 series 36 페이지. Sns-3400 series
Cisco SNS-3415 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지), 문제 해결 매뉴얼 (8 페이지)

페이지 인쇄
Cisco SNS-3415 series 설치 매뉴얼
Before You Begin

Rack Requirements

This section provides the requirements for the standard open racks.
The rack must be of the following type:
• A standard 19-in. (48.3-cm) wide, four-post EIA rack, with mounting posts that conform to English
• The rack post holes can be square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), #12-24 UNC, or
• The minimum vertical rack space per server must be one RU, equal to 1.75 in. (44.45 mm).

Equipment Requirements

The slide rails supplied by Cisco Systems for this server do not require tools for installation. The inner rails
(mounting brackets) are pre-attached to the sides of the server.

Slide Rail Adjustment Range

The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).

Server Specifications

This section lists the technical specifications for the server:

Physical Specifications

The following table lists the physical specifications of the server.
Table 2: Physical Specifications
Description
Height
Width
Depth
Weight (fully loaded chasis)
universal hole spacing, per section 1 of ANSI/EIA-310-D-1992.
#10-32 UNC when you use the supplied slide rails.
Specification
1.7 in. (4.3 cm)
16.9 in. (42.9 cm)
28.5 in. (72.4 cm)
35.6 lb. (16.1 Kg)
Cisco SNS-3400 Series Appliance Hardware Installation Guide
Rack Requirements
15