Cisco SNS-3415 series Instrukcja instalacji - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco SNS-3415 series. Cisco SNS-3415 series 36 stron. Sns-3400 series
Również dla Cisco SNS-3415 series: Instrukcja instalacji (19 strony), Instrukcja rozwiązywania problemów (8 strony)
Drukuj stronę
Before You Begin
Rack Requirements
This section provides the requirements for the standard open racks.
The rack must be of the following type:
• A standard 19-in. (48.3-cm) wide, four-post EIA rack, with mounting posts that conform to English
• The rack post holes can be square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), #12-24 UNC, or
• The minimum vertical rack space per server must be one RU, equal to 1.75 in. (44.45 mm).
Equipment Requirements
The slide rails supplied by Cisco Systems for this server do not require tools for installation. The inner rails
(mounting brackets) are pre-attached to the sides of the server.
Slide Rail Adjustment Range
The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).
Server Specifications
This section lists the technical specifications for the server:
Physical Specifications
The following table lists the physical specifications of the server.
Table 2: Physical Specifications
Description
Height
Width
Depth
Weight (fully loaded chasis)
universal hole spacing, per section 1 of ANSI/EIA-310-D-1992.
#10-32 UNC when you use the supplied slide rails.
Specification
1.7 in. (4.3 cm)
16.9 in. (42.9 cm)
28.5 in. (72.4 cm)
35.6 lb. (16.1 Kg)
Cisco SNS-3400 Series Appliance Hardware Installation Guide
Rack Requirements
15