Cisco SNS-3595-K9 소프트웨어 설치 - 페이지 31

{카테고리_이름} Cisco SNS-3595-K9에 대한 소프트웨어 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SNS-3595-K9 38 페이지.
Cisco SNS-3595-K9에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지)

Install Cisco ISE Software on Cisco SNS Appliances

Step 3

From the Boot Menu, choose the USB as the boot device and press Enter.

Use the arrow keys to select the USB boot device.

Step 4

At the boot prompt, choose one of the following and press Enter.

• Cisco ISE Installation (Serial Console) to install Cisco ISE through a serial console

• Cisco ISE Installation (Keyboard/Monitor) to install Cisco ISE using a keyboard and monitor.

Example:

Figure 12: Boot Prompt

Step 5

After you enter the network configuration parameters in Setup mode, the appliance automatically reboots and returns to

the shell prompt mode.

Step 6

Exit from the shell prompt mode. The appliance comes up.

Step 7

Continue with

Verify the Installation Process, on page

Create a Bootable USB Device to Install Cisco ISE

Use the Fedora Media Writer (formerly Fedora Live USB Creator) tool to create a bootable USB device from

the Cisco ISE installation ISO file.

Before you begin

• Download Fedora Media Writer to the local system from the following location:

• Download the Cisco ISE installation ISO file to the local system.

• Use an 8-GB (or higher) USB device.

lmacken/liveusb-creator/releases/tag/3.12.0

Note

Other USB tools might work, but we recommend that you use Fedora Media

Writer 3.12.0 as it has been tested with Cisco ISE.

Create a Bootable USB Device to Install Cisco ISE

35.

Install Cisco ISE Software on Cisco SNS Appliances

https://github.com/