Epson ES-1200C Pro PC 시작하기 매뉴얼 - 페이지 6
{카테고리_이름} Epson ES-1200C Pro PC에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ES-1200C Pro PC 31 페이지. Product support bulletin(s)
Epson ES-1200C Pro PC에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 제품 지원 게시판 (19 페이지), 매뉴얼 (11 페이지), 시작하기 (17 페이지), 제품 지원 게시판 (5 페이지)
페이지 인쇄
Installing the Interface Card
Use this procedure to install a SCSI interface card. For more
detailed installation instructions, see the manual that came
with your card.
1. Turn off the computer and any peripheral devices.
2. Disconnect the computer's power cable from the electrical
outlet and from the back panel. Also, disconnect any cables
that are connected to the computer, including the keyboard
cable.
3. Remove the cover from your computer. If you need detailed
instructions, see your computer manual.
4. Before you touch any of the computer's internal
components, touch an unpainted metal surface inside the
computer's case to discharge any built-up static electricity.
5. Choose an option slot for the interface card. You can install
the card in any available slot.
6. Remove any retaining screws from the option slot cover
and remove the slot cover. Keep the screw or screws to
secure the option card to the computer. Store the slot cover
in a safe place in case you later remove the interface card.
7. Unpack the interface card. When handling the card, be
careful not to touch any of the components on the circuit
board or the gold-edged connector.
8. Insert the card into the slot, guiding it straight down. Push
the card down firmly (but carefully) to insert it fully. You
should feel the card fit into place.
9. Secure the end of the card to the back of the computer with
the retaining screw or screws.