Epson ES-1200C Pro PC Посібник для початківців - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для початківців для Сканер Epson ES-1200C Pro PC. Epson ES-1200C Pro PC 31 сторінка. Product support bulletin(s)
Також для Epson ES-1200C Pro PC: Посібник користувача (11 сторінок), Бюлетень підтримки продукту (19 сторінок), Посібник (11 сторінок), Початок роботи (17 сторінок), Бюлетень підтримки продукту (5 сторінок)

Installing the Interface Card

Use this procedure to install a SCSI interface card. For more

detailed installation instructions, see the manual that came

with your card.

1. Turn off the computer and any peripheral devices.

2. Disconnect the computer's power cable from the electrical

outlet and from the back panel. Also, disconnect any cables

that are connected to the computer, including the keyboard

cable.

3. Remove the cover from your computer. If you need detailed

instructions, see your computer manual.

4. Before you touch any of the computer's internal

components, touch an unpainted metal surface inside the

computer's case to discharge any built-up static electricity.

5. Choose an option slot for the interface card. You can install

the card in any available slot.

6. Remove any retaining screws from the option slot cover

and remove the slot cover. Keep the screw or screws to

secure the option card to the computer. Store the slot cover

in a safe place in case you later remove the interface card.

7. Unpack the interface card. When handling the card, be

careful not to touch any of the components on the circuit

board or the gold-edged connector.

8. Insert the card into the slot, guiding it straight down. Push

the card down firmly (but carefully) to insert it fully. You

should feel the card fit into place.

9. Secure the end of the card to the back of the computer with

the retaining screw or screws.