Epson ES-300C 제품 지원 게시판 - 페이지 8

{카테고리_이름} Epson ES-300C에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ES-300C 20 페이지. Laser & non-impact printer error codes
Epson ES-300C에 대해서도 마찬가지입니다: 제품 지원 게시판 (19 페이지), 매뉴얼 (8 페이지), 보충 설명서 (15 페이지), 매뉴얼 (11 페이지), 제품 지원 게시판 (14 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (13 페이지)

EPL-7500 cont.

[E] PAPER ENTRY JAM

Paper is not feeding from the specified paper cassette or has jammed on its

way into the printer.

[E] PAPER EXIT JAM

Paper is jammed inside the paper path.

[S] PRlNTlNG

The printer has received data and is printing.

[S] PRlNTlNG TEST

The printer is printing the test page.

[S] PROCESSING

The printer is processing data.

[S] QUlT THE JOB

The On-Line button has been pressed while a print job was in progress. The

job can be flushed by pressing the Reset button, or a reset can be cancelled

by pressing any other button.

[S] QUITTING THE JOB

The printer is flushing a job from the buffer.

[S] READY

The printer is ready to receive data.

[S] RESETTING

This message appears initially when the printer is turned on, and momentarily

between print jobs.

[E] TONER LOW

The imaging cartridge must be replaced.

[S] WAIT- FOR READY

The On-tine button was pressed while a print job was in progress. The printer

continues printing until the current job is completed, then it goes Of-Line.

[S] WAITING

The printer is in the process of executing a job and has run out of data and is

waiting for the channel to provide more data.

PSB No: P-0077

Page: 8 of 11