Cisco UCS 사용자 설명서 - 페이지 33

{카테고리_이름} Cisco UCS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS 50 페이지. C-series

페이지 인쇄

Chapter 6

Installing Operating Systems

•

Note

Network Settings

The Network Settings allows you to enter the network configuration settings for the onboard network

adapters that are detected by the operating system during installation. These settings do not affect the

network settings for the CMC. We recommend that you set different IP addresses for the operating

system and CMC. The network interface column lists each network adapter detected by the UCS-SCU.

Your operating system may have a different name for the interface after you install the operating system.

To configure the network settings, follow these steps:

Step 1

Click Network Settings to open the corresponding window.

The Network Settings window displays the link status of available network interfaces and the

corresponding IP address, subnet mask, gateway, DNS, link status, vendor, type, and MAC address.

Step 2

In the Network Settings window, do the following:

•

–

From the Driver Letter drop-down list, choose a drive.

–

In the Size field, edit the disk size.

Note

The size cannot be more than the available disk space.

–

From the File System drop-down list, choose a file system.

–

Click Ok.

To remove a partition, do the following:

Choose the partition to delete and click Delete.

The OS Install dialog box is displayed.

Click Yes to delete the partition.

In the Red Hat Enterprise Linux, the Root and Swap partitions are necessary. If you do not

specify their sizes during the partition process, the UCS-SCU generates an alert message and

suggests an alternate partition solution. Accept it if you are not familiar with Linux partitions.

In the Work Group or Network Domain area, choose one of the following options:

Select No network or No domain radio button when a network or domain does not need to be added.

Enter a workgroup name in the Work Group Name field. The maximum limit is 20 characters.

Select the Join this Domain radio button and do the following:

–

In the Domain Name text field, enter the name of the domain. The maximum limit is 20

characters.

–

In the Domain Username, enter the user name of the domain. The maximum limit is 20

characters.

–

In the Domain password, enter the password of the domain.The maximum limit is 20 characters.

Select or deselect the Enable Remote Access (RDP) radio button for remote access settings.

Select or deselect the Disable Firewall radio button for firewall settings.

Cisco UCS Server Configuration Utility, Release 5.0

Other OS Install

6-9