Cisco UCS 사용자 설명서 - 페이지 39

{카테고리_이름} Cisco UCS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS 50 페이지. C-series

Chapter 6

Installing Operating Systems

•

Package Selection

To configure the package selection settings, follow these steps:

Step 1

Click Package Selection to open the corresponding window.

Step 2

Select all check boxes that apply.

Network Settings

To configure the network settings, follow these steps:

Step 1

Click Network Settings to open the corresponding window.

The Network Settings window displays the link status of available network interfaces and the

corresponding IP address, subnet mask, gateway, DNS, link status, vendor, type, and MAC address.

Step 2

To edit the Network Settings, do the following:

•

In the Confirm Root Password, reenter the root password.

From the Default Language drop-down list, choose a default language.

From the Keyboard drop-down list, choose the type of keyboard layout.

From the Time Zone drop-down list, choose the time zone.

Select a network interface and click Edit.

The Network Settings dialog box displays.

In the Network Settings dialog box, do the following:

Select IP Address from DHCP server or Static IP Address. If you select Static IP Address, do the

following:

–

In the IP Address field, enter the IPv4 address

–

In the Subnet Mask field, enter the subnet IPv4 address.

–

In the Gateway field, enter the gateway IPv4 address.

–

In the DNS field, enter the DNS IPv4 address.

Click OK.

Cisco UCS Server Configuration Utility, Release 5.0

Other OS Install

6-15