Cisco UCS 5100 구성 매뉴얼 - 페이지 2

{카테고리_이름} Cisco UCS 5100에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS 5100 6 페이지. Uplink ethernet connection
Cisco UCS 5100에 대해서도 마찬가지입니다: 설정 (4 페이지), 설정 (17 페이지), 펌웨어 매뉴얼 (10 페이지), 구성 (5 페이지), 매뉴얼 (14 페이지), 업그레이드 지침 (10 페이지), 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄
Cisco UCS 5100 구성 매뉴얼
•
Server PortsServer Ports handle data traffic between the Fabric Interconnect and the adapter cards
on the servers.
You can only configure Server Ports on the fixed port module. Expansion modules do not support
Server Ports.
•
Uplink Ethernet PortsUplink Ethernet Ports connect to external LAN Switches. Network bound
Ethernet traffic is pinned to one of these ports.
You can configure Uplink Ethernet Ports on either the fixed module or an expansion module.
•
Uplink Fibre Channel PortsUplink Fibre Channel Ports connect to external SAN Switches.
Network bound Fibre Channel traffic is pinned to one of these ports.
You can only configure Uplink Fibre Channel Ports on an expansion module. The fixed module does
not include Uplink Fibre Channel Ports.
This task describes only one method that is available to configure ports. You can also configure ports through
a right−click menu or from the General tab for the port..

Network Diagram

This is a typical topology used with the Cisco UCS:
Note that Uplink Ports are also known as border links.
1. Configure Uplink Ethernet Ports
Complete these steps:
1.
Log into Cisco UCS Manager.
2.
In the Navigation pane, click the Equipment tab.
3.
In the Equipment tab, expand Fabric Interconnects > Fabric Interconnect_Name.
4.
Depending upon the location of the ports you want to configure, expand one of these:
♦
Fixed Module
♦
Expansion Module
5.
Choose one or more of the ports under the Unconfigured Ports node.
6.
Drag the selected port or ports and drop them in the Uplink Ethernet Ports node.