Cisco UCS 5100 Yapılandırma Kılavuzu - Sayfa 2

Sunucu Cisco UCS 5100 için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco UCS 5100 6 sayfaları. Uplink ethernet connection
Ayrıca Cisco UCS 5100 için: Kurulum (4 sayfalar), Kurulum (17 sayfalar), Ürün Yazılımı Kılavuzu (10 sayfalar), Konfigürasyon (5 sayfalar), Manuel (14 sayfalar), Yükseltme Talimatları (10 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

Sayfayı Yazdır
Cisco UCS 5100 Yapılandırma Kılavuzu
•
Server PortsServer Ports handle data traffic between the Fabric Interconnect and the adapter cards
on the servers.
You can only configure Server Ports on the fixed port module. Expansion modules do not support
Server Ports.
•
Uplink Ethernet PortsUplink Ethernet Ports connect to external LAN Switches. Network bound
Ethernet traffic is pinned to one of these ports.
You can configure Uplink Ethernet Ports on either the fixed module or an expansion module.
•
Uplink Fibre Channel PortsUplink Fibre Channel Ports connect to external SAN Switches.
Network bound Fibre Channel traffic is pinned to one of these ports.
You can only configure Uplink Fibre Channel Ports on an expansion module. The fixed module does
not include Uplink Fibre Channel Ports.
This task describes only one method that is available to configure ports. You can also configure ports through
a right−click menu or from the General tab for the port..

Network Diagram

This is a typical topology used with the Cisco UCS:
Note that Uplink Ports are also known as border links.
1. Configure Uplink Ethernet Ports
Complete these steps:
1.
Log into Cisco UCS Manager.
2.
In the Navigation pane, click the Equipment tab.
3.
In the Equipment tab, expand Fabric Interconnects > Fabric Interconnect_Name.
4.
Depending upon the location of the ports you want to configure, expand one of these:
♦
Fixed Module
♦
Expansion Module
5.
Choose one or more of the ports under the Unconfigured Ports node.
6.
Drag the selected port or ports and drop them in the Uplink Ethernet Ports node.