Cisco UCS B200 M4 서비스 매뉴얼 - 페이지 9

{카테고리_이름} Cisco UCS B200 M4에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M4 24 페이지. For e5-2600 v4 series cpus
Cisco UCS B200 M4에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (30 페이지), 설치 및 서비스 참고 사항 (46 페이지), 업그레이드 매뉴얼 (9 페이지)

페이지 인쇄
Cisco UCS B200 M4 서비스 매뉴얼
Servicing a Blade Server
Figure 6: FlexStorage Module
Step 3
Using a Phillips-head screwdriver, tighten the four screws to secure the FlexStorage module. The locations
of the screws are labeled "Secure Here."

Upgrading to Intel Xeon E5-2600 v4 CPUs

Before upgrading to Intel Xeon E5-2600 v4 Series CPUs, ensure that the server is running the required
minimum software and firmware versions that support Intel E5-2600 v4 Series CPUs, as listed in the following
table.
Software or Firmware
Cisco UCS Manager
Cisco IMC
BIOS
Note
Cisco UCS Manager Release 2.2(4) introduced a server pack feature that allows Intel E5-2600 v4 CPUs to
run with Cisco UCS Manager Release 2.2(4) or later, provided that the Cisco IMC, BIOS and Capability
Catalog are all running Release 2.2(7) or later.
Caution
Ensure that the server is running the required software and firmware before installing the Intel E5-2600 v4
Series CPUs. Failure to do so can result in a non-bootable CPU.
Minimum Version
Release 3.1(1e) with 3.1(1g) ucs-catalog.3.1.1g.T.bin, or Release
2.2(7b) (See the following Note for additional supported versions.)
Release 3.1(1g) or Release 2.2(7b)
Release 3.1(1g) or Release 2.2(7b)
Upgrading to Intel Xeon E5-2600 v4 CPUs
Servicing a Blade Server
9