Cisco UCS B200 M4 서비스 매뉴얼 - 페이지 14

{카테고리_이름} Cisco UCS B200 M4에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M4 24 페이지. For e5-2600 v4 series cpus
Cisco UCS B200 M4에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (30 페이지), 설치 및 서비스 참고 사항 (46 페이지), 업그레이드 매뉴얼 (9 페이지)

페이지 인쇄
Cisco UCS B200 M4 서비스 매뉴얼

Installing Memory

Installing Memory
To install a DIMM into the blade server, follow these steps:
Procedure
Step 1
Open both DIMM connector latches.
Step 2
Press the DIMM into its slot evenly on both ends until it clicks into place.
DIMMs are keyed. If a gentle force is not sufficient, make sure the notch on the DIMM is correctly aligned.
Note
Step 3
Press the DIMM connector latches inward slightly to seat them fully.
Supported DIMMs
Do not use any memory DIMMs other than those listed in the specification sheet. Doing so may irreparably
damage the server and require down time.
Memory Population
The blade server contains 24 DIMM slots—12 for each CPU. Each set of 12 DIMM slots is arranged into
four channels, where each channel has three DIMMs.
Figure 12: Memory Slots In the Blade Server
1
Servicing a Blade Server
14
Be sure that the notch in the DIMM aligns with the slot. If the notch is misaligned you may damage
the DIMM, the slot, or both.
Channels A-D for CPU 1
2
Channels E-H for CPU 2
Servicing a Blade Server