Cisco UCS B200 M4 Instrukcja serwisowa - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Serwer Cisco UCS B200 M4. Cisco UCS B200 M4 24 stron. For e5-2600 v4 series cpus
Również dla Cisco UCS B200 M4: Uwaga dotycząca instalacji i obsługi (30 strony), Uwaga dotycząca instalacji i obsługi (46 strony), Instrukcja aktualizacji (9 strony)

Installing Memory

To install a DIMM into the blade server, follow these steps:

Procedure

Step 1

Open both DIMM connector latches.

Step 2

Press the DIMM into its slot evenly on both ends until it clicks into place.

DIMMs are keyed. If a gentle force is not sufficient, make sure the notch on the DIMM is correctly aligned.

Note

Step 3

Press the DIMM connector latches inward slightly to seat them fully.

Supported DIMMs

Do not use any memory DIMMs other than those listed in the specification sheet. Doing so may irreparably

damage the server and require down time.

Memory Population

The blade server contains 24 DIMM slots—12 for each CPU. Each set of 12 DIMM slots is arranged into

four channels, where each channel has three DIMMs.

Figure 12: Memory Slots In the Blade Server

Servicing a Blade Server

Be sure that the notch in the DIMM aligns with the slot. If the notch is misaligned you may damage

the DIMM, the slot, or both.

Channels A-D for CPU 1

Channels E-H for CPU 2

Servicing a Blade Server