Cisco UCS B260 M4 설치 및 서비스 참고 사항 - 페이지 21

{카테고리_이름} Cisco UCS B260 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B260 M4 50 페이지. Blade server
Cisco UCS B260 M4에 대해서도 마찬가지입니다: 설치 및 서비스 참고 사항 (46 페이지)

페이지 인쇄

Servicing the Blade Server

The chapter contains the following sections:

•

Drive Replacement

You can remove and install hard drives without removing the blade server from the chassis.

The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available.

A list of currently supported drives is in the specification sheets at this

URL:http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-b-series-blade-servers/datasheet-listing.html

Before upgrading or adding a drive to a running blade server, check the service profile in Cisco UCS Manager

and make sure the new hardware configuration will be within the parameters allowed by the service profile.

Caution

To prevent ESD damage, wear grounding wrist straps during these procedures.

Removing a Blade Server Drive

Procedure

Step 1

Push the button to release the ejector, and then pull the hard drive from its slot.

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs

Drive Replacement, on page 13

Removing a Blade Server Cover, on page 15

Internal Components, on page 16

Diagnostics Button and LEDs, on page 19

Installing a CMOS Battery, on page 20

Removing a CPU and Heat Sink, on page 20

Installing a New CPU and Heat Sink, on page 22

Installing Memory, on page 26

Installing a Virtual Interface Card Adapter, on page 32

Installing an Adapter Card, on page 33

Installing and Enabling a Trusted Platform Module, on page 34

C H A P T E R