Cisco UCS B420 M3 설치 및 서비스 참고 사항 - 페이지 3
{카테고리_이름} Cisco UCS B420 M3에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B420 M3 38 페이지. High performance blade server
Cisco UCS B420 M3에 대해서도 마찬가지입니다: 업그레이드 매뉴얼 (8 페이지)
페이지 인쇄
LEDs
Server LEDs indicate whether the blade server is in active or standby mode, the status of the network link, the overall health of the
blade server, and whether the server is set to give a blinking blue locator light from the locator button.
The removable drives also have LEDs indicating hard disk access activity and disk health.
Table 1: Blade Server LEDs
LED
Power
Link
Health
Blue locator button and LED
Color
Description
Off
Power off.
Green
Main power state. Power is supplied to all server components and
the server is operating normally.
Amber
Standby power state. Power is supplied only to the service processor
of the server so that the server can still be managed.
Note
Off
None of the network links are up.
Green
At least one network link is up.
Off
Power off.
Green
Normal operation.
Amber
Minor error.
Blinking Amber
Critical error.
Off
Blinking is not enabled.
Blinking blue 1 Hz
Blinking to locate a selected blade—If the LED is not blinking, the
blade is not selected. You can control the blinking in UCS Manager
or by using the blue locator button/LED.
If you press and release the front-panel power button, the
server performs an orderly shutdown of the 12 V main
power and goes to standby power state. You cannot shut
down standby power from the front-panel power button.
See the Cisco UCS Manager Configuration Guide for
information about completely powering off the server from
the software interface.
3