Cisco UCS B420 M4 설치 및 서비스 참고 사항 - 페이지 25

{카테고리_이름} Cisco UCS B420 M4에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B420 M4 38 페이지. Blade server

Servicing the Blade Server

Step 6

Thermally bond the CPU and heat sink. Using the syringe of thermal grease provided with the replacement

CPU, apply 2 cubic centimeters of thermal grease to the top of the CPU where it will contact the heat sink.

Apply the grease in the pattern shown in the following figure, which should use approximately half the contents

of the syringe.

Figure 12: Thermal Grease Application Pattern

Step 7

Replace the heat sink. The yellow CPU heat sink install guide pins that are attached to the motherboard must

align with the cutout on the heat sink to ensure proper installation of the heat sink.

Figure 13: Replacing the Heat Sink

Cisco UCS B420 M4 Blade Server Installation and Service Note

Installing a New CPU and Heat Sink