Cisco UCS B420 M4 Uwaga dotycząca instalacji i obsługi - Strona 25

Przeglądaj online lub pobierz pdf Uwaga dotycząca instalacji i obsługi dla Serwer Cisco UCS B420 M4. Cisco UCS B420 M4 38 stron. Blade server

Servicing the Blade Server

Step 6

Thermally bond the CPU and heat sink. Using the syringe of thermal grease provided with the replacement

CPU, apply 2 cubic centimeters of thermal grease to the top of the CPU where it will contact the heat sink.

Apply the grease in the pattern shown in the following figure, which should use approximately half the contents

of the syringe.

Figure 12: Thermal Grease Application Pattern

Step 7

Replace the heat sink. The yellow CPU heat sink install guide pins that are attached to the motherboard must

align with the cutout on the heat sink to ensure proper installation of the heat sink.

Figure 13: Replacing the Heat Sink

Cisco UCS B420 M4 Blade Server Installation and Service Note

Installing a New CPU and Heat Sink